u.s. cage code 06324 www.glenair.com e-mail: sales@glenair.com 24 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. vg95234 connectors vg95234 c1 and vg95234 c2 bulkhead feed-thru receptacle with threaded (c1) and thru-holes (c2) vg95234 c2 ?a d2 e l4 l1 l2 l3 d2 o-ring alternate insert positions n - x - y basic part number contact arrangement p/s - pin/socket solid contacts bulkhead feed-thru with... c1 - threaded holes c2 - thru holes 1 - standard awg contacts (omit for metric) vg95234 c1 32-6 p/s 1 n application notes 1. bulkhead feed-thru receptacle with threaded or through mounting holes. 2. solid contact material consists of copper alloy with silver plating. please see pages 16-17 for additional contact information. 3. insert arrangements iaw vg95234. please see pages 10-15. 4. standard insert is synthetic rubber, oil and low temperature resistant (-55c to +125c) iaw mil-r-3065. 5. stainless steel and marine bronze shells are available in series its products. please consult factory. 6. all dimensions are metric unless otherwise noted.
u.s. cage code 06324 www.glenair.com e-mail: sales@glenair.com 25 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. vg95234 connectors vg95234 c1 and vg95234 c2 bulkhead feed-thru receptacle with threaded (c1) and thru-holes (c2) dimensions shell size ?a +0 -0.15 d2 e 0.1 l1 0.3 l2 +0.4 -0 l3 0.2 l4 0.3 weight gr. max b1 b2 h13 10 sl 18.2 m4 3.2 18.2 37.5 14.2 2.8 25.4 17 14 s 24.6 m4 3.2 23.0 37.5 14.2 3.2 30.0 29 16 s 27.4 m4 3.2 24.6 37.5 14.2 3.2 32.5 34 16 27.4 m4 3.2 24.6 51.4 19.0 3.2 32.5 41 18 30.8 m4 3.2 27.0 51.4 19.0 4.0 35.0 49 20 34.2 m4 3.2 29.4 51.4 19.0 4.0 38.0 56 22 37.4 m4 3.2 31.8 51.4 19.0 4.0 41.0 61 24 40.9 m4 3.7 35.9 51.4 20.6 4.0 44.5 65 28 46.7 m5 3.7 39.7 51.4 20.6 4.0 50.8 76 32 53.4 m5 4.3 44.5 51.4 22.2 4.0 57.0 92 36 59.6 m5 4.3 49.2 51.4 22.2 4.0 63.5 103 materials shells inserts (temperature range) aluminum alloy iaw qq-a-591 shells high insulation synthetic rubber -55c/+125c crimp contacts copper alloy with silver plating over nickel standard finish (for qq-a-591 aluminum shells) requirements cadmium with olive drab passivation iaw qq-p-416 thermal shock -55c + 125c salt spray after thermal shock 500 hour electrical conductivity very good abrasion resistance very good
|
